产品详情
查看大图

  • 产品名称：韩国DACELL显示仪表DN30W

  • 产品型号：DN30W
  • 产品厂商：韩国大拿DACELL称重传感器
  • 产品价格：0
  • 折扣价格：0
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍：
韩国DACELL显示仪表DN30W RPM processor/tachometer (frequency input). The setup sequence is simple and quick using four push buttons only. ㆍRelay output(Hi, Low) ㆍ4 Relay output
详情介绍：
韩国DACELL显示仪表DN30W

DN30W & MP-981
RPM processor/tachometer (frequency input).
The setup sequence is simple and quick using four
push buttons only.
ㆍRelay output(Hi, Low)
ㆍ4 Relay output
ㆍPeak & sample hold
ㆍAnalog out (DAC)
ㆍWatch dog
ㆍCalibration by Pulse/circle input

Option :
ㆍOP-02 : RS232C serial interface
ㆍOP-03 : RS485 Multi drop interface


 

 
DN30W
  • SPECIFICATIONS
Specifications Accuracy
Application sensor Proximity sensor (MP981) , Rotary Encorder
Sensor authorized voltage DC 12V
Measuring range
Measuring Accuracy		 Input frequency 5kHz max, 1 ~ 350 pulse/circle
0.05%
Display 0 ~ 99999
Character height 7 segment LED 14mm
Voltage output DC 0 ~ 10V (4~20mA : in accordance with customer request)
Contact capacity AC 125V 0.5A, DC 24V 1A
Relay life time more than 5,000,000 times
Usage temperature range -10℃ ~ 60℃
Humidity less than 80% RH (no dew condensation)
Power source used AC 220V 50/60Hz
Dimensions 96 × 48 × 128mm
Cutting size 91.5 × 44.5mm
Weight About 800 g

 
  • DIMENSIONS
 
MP-981
  • SPECIFICATIONS
Specifications Accuracy
Detection method Hall element
Measurement range 1㎐~20㎑(using a 60P/R gear, 1~20,000r/min, 
with an output waveform duty cycle 50%±20%)
Detection gear Strong magnetic materials
Gap between detector and gear (modulus 0.5??3, tooth width 3 mm or greater)
Power supply used DC 12V±2V(0.5Vp-p or less ripple)
Current consumption 40mA or less(12V, at 25℃)
Output waveform Lew level;±0.5V rectangular waveform(With no loac)
Output impedance Approx. 330Ω
Output type Floating groung
Protective circuit Power supply polarity and output short protection
Operating temperature range -10~+70℃
Storage temperature range -20~+80℃
Matching connector 6-pin connector (type R04-PB6F plug)
Allowable vibration double-ended 1.2mm at 30㎐ in X, Y and Z direction
(during-operation) for one hour each.
Allowable shock (non-operating) 490㎨ in Xand Y direction each 3 times
Withstand voltage 1. DC250V, 1min. (between shield and signal cable)
2. DC250V, 1min. (between shield and sensor head)
Interface indicator DN-30
Weight Approx. 80g (including two mounting nuts)
Accessories Mounting nuts(2)

 
  • DIMENSIONS

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

沪公网安备 31011402005142号